User Guide

31
BizCardReader 900C Cleaning Procedure
3. Turn the scanner over so that the bottom side faces up.
4. Remove the 4 screws located on the bottom of the scanner as shown. Use a small flat head
screwdriver. DO NOT remove any other screw.
5. Turn the scanner upright and carefully lift off the top cover.
6. Wipe away dirt or other particles from the glass plate and rubber roller with a dry cotton cloth. Use a
small amount of rubbing alcohol if needed.
7. Carefully re-assemble the top cover and screws. Do not use excessive force when tightening the
screws.
BizCardReader 600C Cleaning Procedure
a. Turn the scanner over so that the bottom side faces up.
b. Remove the screw located on the bottom-right of the scanner as shown. Use a small flat head
screwdriver. DO NOT remove any other screw.