Installation guide

Bizfon Manual II: Administrator's Guide Administrator's Menus
Bizfon4000 (SW Version 3.1.x) 12
The Transfer Statistics page allows a user-defined statistic
table depending on the transmit/receive value (criteria),
interface type and time period. It contains the following
components:
Time Range of statistic table - the drop down list includes
the period(in days) statistics data is to be collected and the
corresponding diagram charts are to be built.
Interface - the drop-down list offer the values:
• WAN - Wide Area Network (WAN) events only
• LAN - Local Area Network (LAN) events only
When Show also as readable values checkbox is selected,
an additional table with statistics values will be displayed on
the next page.
Fig. II-13: Transfer Statistics page
The area Receive Values:
• Receive Bytes - number of received bytes
• Receive Packets - number of received Ethernet packets
• Receive Errors - number of received packets containing
errors
• Receive Drop Errors - number of received packets that
have been discarded
• Receive Overrun Errors - number of received overrun
errors that occur when the receive buffer is not large
enough to hold all incoming packets. This error mostly
appears because of a slow receiving system.
• Receive MultiCast Packets - number of received
broadcast packets
The area Transmit Values:
• Transmit Bytes - number of transmitted bytes
• Transmit Packets - number of transmitted Ethernet
packets
• Transmit Errors - number of transmitted packets
containing errors
• Transmit Drop Errors - number of transmitted packets
that have been discarded
• Transmit Carrier Errors - number of transmit carrier
errors that occur because of a defective or lost
connection on the Ethernet link
• Transmit Collisions - number of transfer errors that
occurred during a simultaneous packet transmission
from both sides
Fig. II-14: Transfer Statistics Diagram Chart