Product Manual

WARNING Never use with gasoline or highly ammable liquids.
Husky Corporation • 2325 Husky Way • Pacic, MO 63069 • Phone: [phone] • Fax: [phone] • www.husky.com
Page 1 009364-1 12/2013
INSTALLATION INSTRUCTIONS
Jarhead Tank Gauges
Model #9909, 9916, 9918, 9930, 10996, 10997, 10998, 10999
Recommended Installation, Maintenance
and Inspection Instructions
JARHEAD
TANK
GAUGES
Important safety InstructIons - save these InstructIons In a readIly accessIble locatIon.
H
L
H
L
H
RISER
1. Measure tank depth - determine if there is a riser.
H/2
NARROW
TANK
BAFFLES
2. Verify there is enough horizontal space for the oat arm. If your tank is HEIGHT H, then you need
H/2 amount of clearance for the arm's travel.
3. Extend hex wrench to loosen the set screw in the support arm's collar.
4. Extend the support arm to the correct length, Hriser + H
L
/2.
5. While maintaining the length from step 4, align the oat arm in line with the spring loaded shaft.
(This will help prevent twists and tangles in the chain.) Tighten the set screw to lock the position
of the support arm.
6. Use hex wrench to loosen the set screws in the oat arm's collar.
LENGTH
HRISER
1/2H
L
FLOAT ARM'S
COLLAR