Instruction Manual

Colocated LTE Antenna Requirements:
•
If the final product contains LTE Cellular Module, the maximum Effective Isotropic Radiated
Power (EIRP) of LTE Module (which combines maximum conducted power of transmitter,
transmission line loses, connector, cable losses and antenna gain) must not exceed the power
levels specified in the Table 2.
•
Antenna gains for each bands shall not exceed gains, which are specified in the specific LTE
module Grants/certificates issued by USA FCC and ISED Canada.
•
The antenna must be installed so that the minimum separation distance of 22 cm is
maintained between the antenna and users.
•
*Power after applying 50% duty cycle
Table 2. Maximum Effective Isotropic Radiated Power for LTE cellular Module and Antenna"
Cellular Bands
Frequency Band (MHz)
EIRP= Max. Conducted Power
+
Maximum Antenna Gain
(mW)
GSM
836.2-848.8
1330.36*
GSM
1850.2-1909.8
997.63*
UMTS
1850-1907.6
1995.26
UMTS
1710-1752.6
1000.00
UMTS
824-846.6
1318.26
LTE
1850-1910
1995.26
LTE
1710-1755
1000.00
LTE
824-849
1288.25
LTE
2500-2570
1000.00
LTE
704-716
1174.90
BK Electronic Design Inc.
www.bkelectronicdesign.com
Page  of 4 5