User manual

display shows “dEF”, either press or

button to change the setting so that the secondary

display shows “yES”. Upon saving and exiting the

utility menu, the instrument will automatically reset

back to its original settings. Below is a table of all the

settings that will be restored.

Table 3 - Instrument Default Settings

Settings

Default Configuration

Primary Function C (Capacitance)

Secondary Function

None

Measurement Method

SER (Series)

Test Frequency 1 kHz

Beep

Auto Power-off

15 (15 minutes)

Power-up State

PrE

Reset Default Settings

Note: In the case where under “PuP” option, “SEt” is

selected and “dEF” is set to “yES”, the “PuP” setting

has priority over the “dEF” setting. This means the

instrument will not

be set back to default upon saving

and exiting the utility menu. Instead, the power-up

settings will be stored and will be recalled upon the

next power-up of the instrument.