Installation Instructions
Table Of Contents
- Introduction
- FCC Requirements
- Innovation, Science and Economic Development Canada Compliance
- Safety Precautions
- Information and Options
- Battery Installation and Removal
- Battery Care and Maintenance
- Antenna Installation and Removal
- Radio Controls
- LCD Display
- Programmable Switch and Button Functions
- Channel/Zone Selection Options
- Basic Radio Operation
- Command Zone Operation
- Code Guard/NAC Operation
- Mixed Mode Operation
- Trunking Channel Basic Operation
- Scan Options
- Pick List Options
- Unit-to-Unit Call Options
- Emergency Signaling Options
- Encryption Operation
- Messaging
- Paging and Call Alert
- Radio Inhibit/Enable [INH]/[UNINH]
- Other Options and Functions
- Backlight [LITE]
- Battery Life [LIFE]
- Bluetooth [BT]
- Busy Channel Operation
- Channel Select [CHAN]
- Cloning [CLON]
- Contrast
- Control Lockout [LCK]
- Date and Time [DATE]
- Global Positioning [GPS]
- Hard Power Down [PWRD]
- Keypad Programming
- Minimum Volume [VOL]
- Monitor [MON]
- Nuisance Channel Delete [DEL]
- Phone [PHN] and Hang Up [HANG]
- Radio Accountability Tone [RAT]
- Radio info
- Repeater Talkaround [T/A]
- Send Alert Tone [SNDT]
- Send Signal [SEND]
- Squelch Adjust [SQL]
- Site Display [STDS]
- Site Lock [STLK]
- Site Search [STSR]
- Surveillance Mode [SURV]
- System Test
- Transmit Digital [TXAD]
- Transmit Power [PWR]
- Two-Tone Select [TONE]
- Versions
- Zone Select [ZONE] (Conventional and Trunked Channels)
- Keypad Programming
- BK Technologies Warranty Information
- My Radio Settings
BK Technologies
- 52 -
Versions
Conventional and Trunking Channels
Version information about your radio can be viewed via the “Versions”
menu item.
To review the information, open the Versions menu. Use the NEXT or
PREV to view the installed revisions of individual items.
Version information includes:
Date: Date of release.
Release: Overall release code.
Software: Release code for ARM.
DSP: Release code for DSP.
File Format: Currently installed le format.
BSP: Release code of installed BSP rmware.
PCB Revision: Installed printed circuit board revision number.
Date of Manufacture: Date of manufacture.
C-ACE: Version of encryption module.
Current version information can be found in the service section at
www.bktechnologies.com.
Zone Select [ZONE] (Conventional and Trunked Channels)
Zone Select allows the radio user to switch between programmed
channel zones.
The Zone Select operation can be assigned as a button, switch or
menu list item..
When Zone is assigned to a button, press the button to open the menu
of available zones.
When assigned as a menu item, open the menu as described in the
Navigation section.
Select the Zone you want to use.
Press “ENTER” select the Zone.
Also, If enabled, a zone can also be accessed directly from the keypad.
(Refer to your PC Radio Editor documentation.)
(See also, Channel/Zone Selection Options.)