Installation Instructions
Table Of Contents
- Introduction
- FCC Requirements
- Innovation, Science and Economic Development Canada Compliance
- Safety Precautions
- Information and Options
- Battery Installation and Removal
- Battery Care and Maintenance
- Antenna Installation and Removal
- Radio Controls
- LCD Display
- Programmable Switch and Button Functions
- Channel/Zone Selection Options
- Basic Radio Operation
- Command Zone Operation
- Code Guard/NAC Operation
- Mixed Mode Operation
- Trunking Channel Basic Operation
- Scan Options
- Pick List Options
- Unit-to-Unit Call Options
- Emergency Signaling Options
- Encryption Operation
- Messaging
- Paging and Call Alert
- Radio Inhibit/Enable [INH]/[UNINH]
- Other Options and Functions
- Backlight [LITE]
- Battery Life [LIFE]
- Bluetooth [BT]
- Busy Channel Operation
- Channel Select [CHAN]
- Cloning [CLON]
- Contrast
- Control Lockout [LCK]
- Date and Time [DATE]
- Global Positioning [GPS]
- Hard Power Down [PWRD]
- Keypad Programming
- Minimum Volume [VOL]
- Monitor [MON]
- Nuisance Channel Delete [DEL]
- Phone [PHN] and Hang Up [HANG]
- Radio Accountability Tone [RAT]
- Radio info
- Repeater Talkaround [T/A]
- Send Alert Tone [SNDT]
- Send Signal [SEND]
- Squelch Adjust [SQL]
- Site Display [STDS]
- Site Lock [STLK]
- Site Search [STSR]
- Surveillance Mode [SURV]
- System Test
- Transmit Digital [TXAD]
- Transmit Power [PWR]
- Two-Tone Select [TONE]
- Versions
- Zone Select [ZONE] (Conventional and Trunked Channels)
- Keypad Programming
- BK Technologies Warranty Information
- My Radio Settings
BKR9000 Portable Radio User’s Manual
- 53 -
Keypad Programming
Radio programming is to be performed only by authorized personnel.
Any or all functions may be password protected to prevent unauthorized
access. Check with your communications ocer for information on the
programmed functions of your radio.
NOTE: Trunking channels and systems cannot be programmed via the
radio keypad.
Keypad programmable categories include individual Channel, Zone
and Global radio parameters, individual P25 ID Quick Call/Receive List,
User Tone List, User NAC List and User Talk Group ID List.
Check with your BK Technologies dealer or communications ocer for
information on the programmed functions of your radio.
Keypad Programming Navigation
While in programming mode the diamond, arrow up, arrow down and
square buttons are used navigate the programming functions. The
following table shows possible button functions:
Keypad Programming Buttons
ENT Opens the highlighted function or enters the displayed information
ESC Press once to go back to previous screen or hold to exit
programming mode and return to normal radio operation
NEXT Move to the next item in a displayed list or the next character in a
displayed value
PREV Move to the previous item in a displayed list
EDIT Used to select and edit individual characters in a displayed value
BACK Move to the previous character in a displayed value
CLR Clears the displayed value
EDIT Used to edit individual characters in a displayed value
INV Inverts a displayed digital tone value (CDCSS)