Installation manual

Not active

Turn switch

Press key for 5 seconds

to access user menu

Display shows setting

Display shows description

of the “b” function

Display shows “b” No.

Display shows setting

Start/Stop

Main Switch

USER MENU

! To enter user menu, press alarm key for 5 sec.

! To exit user menu, turn the switch to the left.

! The user menu can be operated by the end-customer as well as by the service engineer.

User Menu B1-B7

B1 Save presettings

In this function, you save the preset time and temperature. If, for instance, the end user uses HOT AIR at

356°F (180°C) for 30 minutes, the standard setting can be

changed as follows:

1. Change time and temperature.

2. Enter user menu (keep pressing alarm key for 5 minutes)

3. Select B1 (save presettings).

4. Press alarm key to accept.

You can only save the settings when the control lamp next to the alarm key flashes.

B2 Timer start

(Please see user manual)

B3 Sound

level low

In this function, you adjust the sound that is heard when a key is activated. The sound level can be adjusted

from 0 to 9 (0 is no sound at all). You adjust the sound level by pressing the step key.

B4 Sound level high

In this function, you adjust

the sound that comes from the alarm. The sound level can be adjusted from 1 to

9 (1 is very low). You adjust the sound by pressing the step key.

B5 Sound frequency

In this function, you adjust the sound frequency. The sound frequency can be adjusted from 1 to 9.

You

adjust the sound by pressing the step key. You test the sound by pressing the alarm key.

B6 Interior light

In this function, you adjust the interior light. The light can be set at 0 or 5.

0= Light is always on.

5= Light goes out when the oven has been idle

for 5 minutes.

You adjust the interior light by pressing the step key.