Installation manual
20
ANNUAL SERVICE CHECK
Customer:__________________________________________________________________________
Address:________________________________ City:_____________ State:____ Zip code:_________
Serial No:_________________
Model:___________________________ By:____________________
1. Connection:
Water connection – dirt filter
(may need tightening)
Electrical connection
(may need tightening)
Drain connection
(may need tightening)
Positioning of oven
2. Door:
Closing device
(may need adjusting)
Catch
(may need adjusting)
Sealing
(must be tight at 100°C steam or combi steam)
Hinging
(may need adjusting)
Interior glass
(hinging, fastening)
3. Inside:
Interior light
Jets
(may
need cleaning)
Fan
(should rotate freely and be tightly fitted)
Heating element
(may need tightening)
4. Beneath oven:
Drain system
(Check for leaks and blocks)
Condensation jet and drain sensor
Drip tray
Drip slide on oven door
5. Motor room:
Connection to heating elements
Load distribution on phases
Wire connection
(overloading, bad connection, & tightening)
Exhaust motor
Fan motor
(may need tightening)
Frequency transformer
(check regulation)
ClimaOptima
Cooling fan
Filter for intake
(may need cleaning)
Check for moisture
6. Steam generator:
Heating elements
(check for leaks)
Load distribution on phases
Level sensor – to be cleaned
Drain pump
May need descaling
7. Functional test:
Components
(Use test function)
Core temperature probe
Operation modes
CombiWash
Functions
Correctly
YES NO
Functions
Correctly
YES NO










