Installation manual

Setting of core temperature (optional extra):
Press CORE TEMPERATURE key.
If the display is off, the core temperature appears as 75°C.
Set core temperature between 30 and 99°C with turn switch.
Core temperature is deactivated by turning switch past 30.
When core temperature is chosen, time changes to ”-:--” .
Confirm by pressing CORE
TEMPERATURE key again.
The core temperature probe has several measuring points on its tip. The computer calculates an average
temperature thus ensuring that the core temperature is 100% correct. If the probe is inserted incorrectly, the
advanced technology notifies you at once. The probe is inserted vertically in the thickest part
of the product.
When preparing products of very different sizes, you get a uniform quality by inserting the sensor in the
smallest product and then moving it to a larger product when the core temperature alarm sounds.
Programs:
10 programs that can hold 3 process steps each. It is possible to write
10 characters and entering
alarm after steps 1 and 2.
Press PRG and turn the switch. The first five programs are preset at the factory (P0 – P4). Start the
program by pressing the ON/OFF key.
To leave PROGRAM, turn the switch beyond ”P
O”.
To delete an entire program, press core temperature key and alarm key simultaneously for 2 seconds.
When the keys or the turn switch is idle for 20 seconds, the oven returns to manual operation.
Entering and changing text:
To enter or change text, press PRG for 3 seconds.
The first digit or
the relevant letter/”_” flashes alternately. Change the flashing character with the turn
switch. You can choose between all the letters of the alphabet and the digits 0 – 9.
The space sign is next to the letter A.
Move on to the next digit by pressing PRG briefly.
Store text
by pressing PRG until “SAVED” appears in the display.
To leave text editing without storing, press ALARM. The original text reappears.
8