Service manual

Combi-Oven Installation
17
Initial Checks and Adjustments
Upon completion of the installation, perform the following to ensure proper operation of the oven.
Category Activity Date Performed
Oven exterior
• Check that the oven has suffered no transport
damages (dents, scratches, etc.)
• Check/adjust height and check that the oven is
placed level (horizontally)
Connections
• Check for correct water connection
o open water supply
o check for leaks
o close water supply
o check and clean dirt filter
o reopen water supply
o check hand shower and stop tap
(under the oven)
• Check correct electrical connection
• Check correct drain connection
o check correct mounting of drip tray
o check correct fall of hose from drip
tray, and examine for leaks
• Check correct exhaust connection
• Clean the oven
• Apply the steel oil which is delivered with the
oven
Oven
compartment
• Check the direction of rotation of the fan
• Check that the filter housing is mounted
correctly
• Check interior light
• Clean the oven
Operating panel
• Check and adjust, if necessary, each of the
pre-set values
•
Heat up the oven to 482°F for approx. 5 min.