Technical data

40 / 80  BKI 09 ATEX 0003X  htk4014a0600p_01.doc
Function Input Range Description
1.4 User data
1.4.3 Checksum Read only This value is used for identification of the device software version. The
checksum is tested when starting. This helps to detect any problems with the
microcontroller.
1.4.4 Tag number 00000 01 This parameter assigns an identification number to the device. A text consisting
of maximum 8 ASCII characters can be entered.
1.4.5 Serial number Read only This parameter serves to identify the respective measuring device. This number
cannot be changed and sets the address for use with HART® interfaces.
1.4.6 French command
number
Read only Factory-programmed number, to be quoted in case of warranty and service
claims.
1.4.6 German command
Number
Read only Factory-programmed number, to be quoted in case of warranty and service
claims.
Option**
(Descriptor)
With this function an ASCII string with max. 15 characters lenght can be
entered. (only user information)
Single rod, Twin rod, Single cable, Single
cable + counterweight,
Single cable without counterweight, Twin
cable, Twin cable + counterweight, Coaxial,
Special 1, Special 2 or Special 3
1.4.9 Probe type
As per order
Information on probe type supplied with signal converter. This is a read-only
parameter.