Service manual

Multi-Deck Warmer Wiring Diagrams
15
1
2
3
REMOVE COVER ON
BACK OF UNIT TO
ACCESS BALLAST(S)
4
ITEM #
PART #
DESCRIPTION
1. B0095 BALLAST, 3 LAMP T8, 120/277V
2.
TB0065
TB0067
TB0068
TERM BLOCK 4 CONDUCTOR W/MTG FOOT
TERM BLOCK 2 CONDUCTOR
TERM BLOCK END PLATE
3.
TB0100
TB0101
TB0102
TB0109
TB0106
TERMINAL SECTION, 3 POLE
TERMINAL SECTION, 3 POLE GROUND
TERMINAL END PLATE
TERMINAL END STOP
TERMINAL JUMPER, 2 POSITION
4.
SCR091
SP0031
Screw, #10-24 x ¾” Nylon Pan Head
Spacer, ∅3/8” x 3/16”
Do Not use metallic hardware to mount Ballasts
Wiring Diagrams
Refer to the table below to find the wiring diagram associated with your unit.
Model
Drawing #
Page #
MDW36-3C SB68696600 16
MDW36-3V SB68696700 17
MDW36-3VW SB68696800 18
MDW36-4C SB68696300 19
MDW36-4V SB68696400 20
MDW36-4VW SB68696500 21
MDW36-5C SB68696000 22
MDW36-5V SB68696100 23
MDW36-5VW SB68696200 24
MDW48-3C SB68695600 25
MDW48-3V SB68695700 26
MDW48-3VW SB68695800 27
MDW48-4C SB68695300 28
MDW48-4V SB68695400 29
MDW48-4VW SB68695500 30
MDW48-5C SB68695000 31
MDW48-5V SB68695100 32
MDW48-5VW SB68695200 33