Operating instructions

Single Revolving Oven Maintenance
12
Maintenance
Failure to comply with the maintenance below could result in a serious accident or
equipment damage.
Failure to remove power from this unit before performing maintenance may cause severe
electrical shock. This unit may have more than one disconnect switch.
Scheduled Maintenance
Oven Cleaning
The oven must be cleaned at the end of each business day. Cleaning is not only necessary for sanitary reasons,
but will increase sales appeal and maximize operating efficiency.
Failure to remove power from this unit may cause severe electrical shock. This unit may
have more than one disconnect switch.
Using abrasive cleaners may damage the cabinet finish. Use only a mild soap and water
solution.
DO NOT USE OVEN CLEANER on this machine. Caustic cleaners can cause damage to
the machine.
Never steam clean or get excess water in the interior of the cabinet as this can damage
unit.
Always wear appropriate personal protection equipment during the cleaning process to
guard against possible injury from hot cleaning solution.
1. Turn off all switches and controls.
2. Let the oven cool to room temperature.
3. Pull grease drawer out of oven and empty it’s contents.
4. Clean grease drawer and tray area with hot soapy water.
5. Remove all food products from the unit. Remove all racks, trays, spits and frames from the unit and place
them in a large sink to soak in hot cleaning solution (BKI Cleaner).
6. Clean the outside and inside of the rotisserie oven with warm water, a sponge and an approved cleaner
which is authorized for use on food surface areas.
7. Clean racks, trays, spits and frames with warm water, a sponge and BK Cleaner. Wipe dry with a clean
cloth.
8. Reassemble the oven.