Specifications

20 3-Channel DVI Extender - Installation and Operation Manual
CONFIGURATION
HORIZONTAL POSITION
If the image position of the analog signal is not correct, use the cursors to switch
from “auto” to “man” (manual) and adjust the horizontal position within a range
from –40 to +40. If your output device responds very slowly to the changes, select
“Force monitor adjust” to ensure that any change to the image position briefl y
interrupts the video signal.
VERTICAL POSITION
Use the cursors to switch from “auto” to “man” (manual) and adjust the vertical position
within a range from –20 to + 20. If your output device responds very slowly to the changes,
select “Force monitor adjust” to ensure that any change to the image position briefl y
interrupts the video signal.