User's Manual

724-746-5500 | blackbox.com
724-746-5500 | blackbox.com
Page 223
LGB5028A User‘s Manual
Appendix A: Glossary
Achieving the required QoS becomes the secret to a successful end-to-end business solution. Therefore, QoS is the set of
techniques to manage network resources.
RARP: RARP is an acronym for Reverse Address Resolution Protocol. It is a protocol that is used to obtain an IP address for a given
hardware address, such as an Ethernet address. RARP is the complement of ARP.
RADIUS: RADIUS is an acronym for Remote Authentication Dial-In User Service. It is a networking protocol that provides
centralized access, authorization and accounting management for people or computers to connect and use a network service.
RDI: RDI is an acronym for Remote Defect Indication. It is OAM functionallity that is used by a MEP to indicate a defect detected
to the remote peer MEP.
RSTP: In 1998, the IEEE, with document 802.1w, introduced an evolution of STP: the Rapid Spanning Tree Protocol, which pro-
vides for faster spanning tree convergence after a topology change. Standard IEEE 802.1D-2004 now incorporates RSTP and
makes STP obsolete, while at the same time being backwards-compatible with STP.
SHA: SHA is an acronym for Secure Hash Algorithm. It designed by the National Security Agency (NSA) and published by the NIST
as a U.S. Federal Information Processing Standard. Hash algorithms compute a fixed-length digital representation (known as a
message digest) of an input data sequence (the message) of any length.
Shaper: A shaper can limit the bandwidth of transmitted frames. It is located after the ingress queues.
SMTP: SMTP is an acronym for Simple Mail Transfer Protocol. It is a text-based protocol that uses the Transmission Control
Protocol (TCP) and provides a mail service modeled on the FTP file transfer service. SMTP transfers mail messages between
systems and notifications regarding incoming mail.
SNAP: The SubNetwork Access Protocol (SNAP) is a mechanism for multiplexing more protocols than can be distinguished by the
8-bit 802.2 Service Access Point (SAP) fields on networks using IEEE 802.2 LLC. SNAP supports identifying protocols by Ethernet
type field values; it also supports vendor-private protocol identifier.
SNMP: SNMP is an acronym for Simple Network Management Protocol. It is part of the Transmission Control Protocol/Internet
Protocol (TCP/IP) protocol for network management. SNMP enables diverse network objects to participate in a network
management architecture. It enables network management systems to learn network problems by receiving traps or change
notices from network devices implementing SNMP.
SNTP: SNTP is an acronym for Simple Network Time Protocol, a network protocol for synchronizing the clocks of computer
systems. SNTP uses UDP (datagrams) as transport layer.
SSID: Service Set Identifier is a name used to identify the particular 802.11 wireless LANs to which a user wants to attach. A client
device will receive broadcast messages from all access points within range advertising their SSIDs, and can choose one to connect
to based on pre-configuration, or by displaying a list of SSIDs in range and asking the user to select one.
SSH: SSH is an acronym for Secure SHell. It is a network protocol that allows data to be exchanged using a secure channel
between two networked devices. The encryption used by SSH provides confidentiality and integrity of data over an insecure net-
work. The goal of SSH was to replace the earlier rlogin, TELNET and RSH protocols, which did not provide strong authentication
or guarantee confidentiality.
SSM: SSM In SyncE this is an abbreviation for Synchronization Status Message.
STP: Spanning Tree Protocol is an OSI Layer 2 protocol that ensures a loop-free topology for any bridged LAN. The original STP
protocol is now made obsolete by RSTP.
SyncE: SyncE Is an abbreviation for Synchronous Ethernet. This functionality is used to make a network “clock frequency”
synchronized. Not to be confused with real time clock synchronized (IEEE 1588).
TACACS+: TACACS+ is an acronym for Terminal Acess Controller Access Control System Plus. It is a networking protocol that
provides access control for routers, network access servers, and other networked computing devices via one or more centralized
servers. TACACS+ provides separate authentication, authorization, and accounting services.