User's Manual

724-746-5500 | blackbox.com
724-746-5500 | blackbox.com
Page 89
LGB5028A User‘s Manual
Chapter 6: Configuration
V1 Reports Received: The number of received V1 reports.
V2 Reports Received: The number of received V2 reports.
V1 Leaves Received: The number of received V1 leaves.
Auto-refresh: Check this box and the device will refresh the log automatically.
Upper right icon (Refresh, <<, >> ): You can click the “Refresh” button to manually refresh the IGMP Group Status. Use the
“<<” and “>>” buttons to go to the next/previous page or entry.
6.6.5 Group Information
The section describes how to set the MLD Snooping Groups Information. Choose the “Start from VLAN,", and ”group address”
input fields to select the starting point in the MLD Group table.
Each page shows up to 99 entries from the MLD Group table, and the default is 20, selected through the “entries per page”
input field. When first visited, the Web page will show the first 20 entries from the beginning of the MLD Group Table.
Web Interface
To display the MLD Snooping Group information in the Web interface:
1. Click “Configuration,” “MLD Snooping,” “Group Information.”
2. To auto-refresh the information, click the box next to “Auto-refresh.”
3. Click “Refresh” to refresh an entry of the MLD Snooping Group Information.
4. Click “Clear” to clear the MLD Snooping Groups information.
Figure 6-37. The MLD Snooping Groups Information screen.
Parameter Description
Navigating the MLD Group Table
Each page shows up to 99 entries from the MLD Group Table, and the default is 20, selected through the “entries per page”
input field. When first visited, the Web page will show the first 20 entries from the beginning of the MLD Group Table. The “Start
from VLAN” and “group address” input fields allow the user to select the starting point in the MLD Group Table. Clicking the
button will update the displayed table starting from that or the next closest MLD Group Table match. In addition, the two input
fields will—upon a button click—assume the value of the first displayed entry, allowing for continuous refresh with the same start
address. The switch will use the last entry of the currently displayed as a basis for the next lookup. When the end is reached, the
text “No more entries” is shown in the displayed table. Use the “Refresh” button to start over.
MLD Snooping Information Table Columns
VLAN ID: VLAN ID of the group.
Groups: Group address of the group displayed.
Port Members: Ports under this group.
Auto-refresh: Click on the auto-refresh icon and the device will refresh the log automatically.