Computer Hardware User Manual

5250 REMOTE EMULATOR CARD

Under CCITT X.21: (1) DB44 male to DB15

female (EHN060-0020);

Under CCITT V.35: (1) DB44 male to 34-pin

M-block male (EHN062-0020)

Approvals — FCC Part 15 Class A, DOC Class/MDC classe A,

VDE B, CISPR 22 Class B

Standards — Data Communication: EIA RS-232D/CCITT V.24,

CCITT X.21, or CCITT V.35 (the standard used by

your card depends on the adapter cable you attach

to it)

Compatibility — Operating Systems: DOS, Windows (under a DOS

partition);

Software:

By IBM: Application Program Interface (API), File

Support Utility (FSU), File Transfer Facility (FTF),

PC Support/36, PC Support/38, PC Support/400,

and Rumba

;

By Emerald/Andrew: Emulator Transfer Utility

(ETU™);

By HandsOn: Decisionlink

and PC Connect;

By Connectronix: Wintronix

Interface — Proprietary; with adapter cables, can support EIA

RS-232D/CCITT V.24, CCITT X.21, and CCITT

V.35

Protocol — SDLC

Emulations — Controllers: IBM 5251-12, 5294, and 5394;

Displays: IBM 5251-11, 5291, 5292-1, 3179-1, 3180,

3196, 3197C, and 3197D;

Printers: IBM 5224/5225, 5256, 4210 (under 4214

emulation), 4214 (can only support APF and BGU

with IBM Proprinter

or Epson

EX or LQ models),

3812 (non-IPDS) and 5219 (HP LaserJet only)

PC Ports

Supported — LPT1, LPT2, LPT3, COM1, and COM2

Sessions

Supported — Minimum: One display;

Maximum: Seven (session #1 must be a display,

otherwise any combination of displays and printers;

DOS supports a maximum of five printers)