Computer Hardware User Manual

67
5250 REMOTE EMULATOR CARD
8.2.6 D UPLEX P RINTING
The AS/400 will only recognize duplexing in word processing. To access
duplexing in data processing, type one of these commands from the Card’s
command language into the first line of the document.
¬D0 for simplex printing
¬D1 for landscape duplex printing
¬D2 for portrait duplex printing
Refer to Section 8.3.6 for more information.
8.2.7 D OCUMENT /E NVELOPE P RINTING
Print a letter and an envelope from DisplayWrite/36 or AS/400 Office
in the same document by following this procedure:
1. Set the format for the letter, and enter the letter file. On the first
typing line, press [CMD20] for “Change Format.”
2. Select 1
for “Entire Document Options.”
3. Select 1 for “Document Format.”
4. Select 3 for “Typestyle/Color,” type in the font ID Number for
the letter (such as No. 11, 86, etc.), then press [ENTER].
5. From the Document Format screen, select option 4
for “Page
Layout/Paper Options.” Scroll to the second screen of these options
and select a paper size and a paper source. If the letter is more than
one page, select the same paper source for the following pages.
Press [ENTER] to return to the Document Format screen.
6. Press [CMD12] to return to the Document Options screen.
7. You can now set up the alternate format for the envelope.
Select 2
for “Alternate Format.”
8. Select 3 for “Typestyle/Color.” Type in a font ID for the envelope,
such as 5, and press [ENTER] to return to the Alternate Format
screen.
9. Select 4
, “Page Layout/Paper Options.” Type in a “first typing line”
of 11, then scroll down to the second screen of the options; choose
a paper width of 7.5 (monarch size) or 9.5 (commercial, #10 size)
and a paper length of 4 inches.