Computer Hardware User Manual

5250 REMOTE EMULATOR CARD

Table 9-1 (continued). Error Codes.

SRC Description Possible Causes(s)

0099 There is no SNA session active for In many cases, when this error

the display station. Normally, this code appears, it will be replaced in

means that the display station or its about 30 seconds with one of the

remote controller is varied off, and previous seven non-Token-Ring

the screen is blank. error codes. If this happens, the

new error code will be more

specific, and should be used to

determine the problem. If error

code 0099 is not replaced, the

problem might be:

a. The display station has been

varied off at the host, though its

remote controller is varied on.

b. The display station is not

configured on the host, or its

twinax address (0 through 6,

local station address) is

configured incorrectly.

Emulator drops off line and will not come back up or stays at a “Vary on

pending” status.

Cause: Interference on telephone line.

Action: Have the phone company check the telephone line.

Cause: Message on console.

Action: Answer, then delete, the message.

Cause: Modem or emulator “locked up.”

Action: Power OFF, then power ON both modems and/or the

emulator.