Network Hardware User Manual

Page 126
724-746-5500 | blackbox.com
LB308A
Chapter 6: Command Line Console Management
4. Example:
The following example enables alarm trigger of power “1” to the Hardened
Ethernet Extender Switch:
switch_a(config)#alarm-trigger power 1
switch_a(config)#
Reboot
1. Command Mode: Privileged Exec mode
Logon to Privileged Exec Mode (Enable Mode). The switch_a# prompt will show
on the screen.
switch_a#
2. Usage:
Use reload command to restart the Hardened Ethernet Extender Switch.
3. Command Syntax:
reload
4. Example:
The following example specifies restarting Hardened Ethernet Extender Switch:
switch_a#reload
switch_a login:
Logout
1. Command Mode: Exec mode or Privileged Exec mode
Logon to Exec Mode (View Mode) or Privileged Exec Mode (Enable Mode). The
switch_a> or switch_a# prompt will show on the screen.
switch_a>
switch_a#
2. Usage:
Use logout command to exit from the Exec mode or Privileged Exec mode.
3. Command Syntax:
logout