Network Hardware User Manual

Page 22
724-746-5500 | blackbox.com
LB308A
Chapter 2: Overview
Table 2-1. Port status LEDs.
Number Indicator State Indication
1 Power 1 Steady Power on.
2 Power 2
Off Power off.
3 Power 3
10/100BASE-TX Port
4 LINK/ACT
Steady A valid network connection is established.
Flashing Transmitting or receiving data. ACT stands for Activity.
5 100
Steady Connection at 100-Mbps speed.
Off Connection at 10-Mbps speed.
Ethernet Extender Port
6 LINK/ACT
Steady A valid network connection is established.
Flashing Transmitting or receiving data. ACT stands for Activity.
Table 2-2. Power input assignment.
Number Input Polarity Voltage Connector
7 Power 3 12 VDC DC jack
8 Power 2
+ 12–48 VDC
Terminal block
- Power Ground
9 Power 1
+ 12–48 VDC
- Power Ground
10 Ground
11 Relay output rating 1 A @24 VDC