Network Hardware User Manual

Page 24
724-746-5500 | blackbox.com
LB308A
Chapter 2: Overview
Figure 2-3. Ethernet Extender RJ-11 and terminal block connectors.
Table 2-5. RJ-11 and terminal
block port pinouts.
Pin Signal
3 Tip
4 Ring
WARNING: Improper operation might damage the terminal block.
Ethernet Extender Mode Settings
You can set the Ethernet Extender modes via DIP switches on the front panel of
the Hardened Ethernet Extender Switch.
Table 2-6. DIP switch settings.
Loc Rmt
The device operate in local mode. The device operates in remote mode.