Printer Accessories User Manual

ManualsBrandsBlack Box ManualsPrinter AccessoriesAC1021A-REC

RGBHV Video with Stereo Audio

Fiber Optic Transmission System

JANUARY 2005

AC1020A

AC1021A-XMIT

AC1021A-REC

CUSTOMER

SUPPORT

INFORMATION

Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500)

FREE technical support, 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746

Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018

Web site: www.blackbox.com • E-mail: info@blackbox.com

NEED NEW PHOTO

1000 Park Drive • Lawrence, PA 15055-1018 • 724-746-5500 • Fax: 724-746-0746

P/N 123231 Rev.A

Summary of content (8 pages)

PAGE 1
JANUARY 2005 AC1020A AC1021A-XMIT AC1021A-REC RGBHV Video with Stereo Audio Fiber Optic Transmission System NEED NEW PHOTO P/N 123231 Rev.A © Copyright 2005. Black Box Corporation. All rights reserved. 1000 Park Drive • Lawrence, PA 15055-1018 • 724-746-5500 • Fax: 724-746-0746 CUSTOMER SUPPORT INFORMATION Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S.
PAGE 2
PAGE 3
AC1020A/AC1021A-XMIT/ AC1021A-REC Trademarks TRADEMARKS USED IN THIS MANUAL UL is a registered trademark of Underwriters Laboratories Incorporated. Any other trademarks used in this manual are acknowledged to be the property of the trademark owners.
PAGE 4
AC1020A/AC1021A-XMIT/ AC1021A-REC NOM STATEMENT Normas Oficiales Mexicanas (NOM) Electrical Safety Statement INSTRUCCIONES DE SEGURIDAD 1. Todas las instrucciones de seguridad y operación deberán ser leídas antes de que el aparato eléctrico sea operado. 2. Las instrucciones de seguridad y operación deberán ser guardadas para referencia futura. 3. Todas las advertencias en el aparato eléctrico y en sus instrucciones de operación deben ser respetadas. 4.
PAGE 5
AC1020A/AC1021A-XMIT/ AC1021A-REC nom statement descrito en el instructivo de operación, o como se indique en el aparato. 12. Precaución debe ser tomada de tal manera que la tierra fisica y la polarización del equipo no sea eliminada. 13. Los cables de la fuente de poder deben ser guiados de tal manera que no sean pisados ni pellizcados por objetos colocados sobre o contra ellos, poniendo particular atención a los contactos y receptáculos donde salen del aparato. 14.
PAGE 6
AC1020A/AC1021A-XMIT/ AC1021A-REC installation Indicator LEDs: The transmitter and receiver units in the A1020A system each have three integral indicator LEDs that are used to monitor the state of the unit. Their status is as follows: TRANSMITTER and RECEIVER: Power: (Green) Indicates that correct power has been applied. TRANSMITTER: Video: OFF: Indicates no video detected on the input. BLINKING GREEN: Indicates either H or V sync detected at the input but not on both.
PAGE 7
AC1020A/AC1021A-XMIT/ AC1021A-REC INSTALLATION items included 4. Connect the audio input signals to the transmitter stereo jack and the audio output to the receiver stereo jack. 5. Apply power to both units. Refer to Figure 1. 6. When power is applied, the green POWER LED will light, indicating the presence of operating power. The VIDEO LED will give an indication as described on Page 9. 7. The green AUDIO LED will give an indication as stated on Page 9.
PAGE 8
AC1020A/AC1021A-XMIT/ AC1021A-REC GENERAL INFORMATION general information Introduction: The RGBHV Video with Stereo Audio Fiber Optic Transmission System (AC1020A V/A System) is a transmitter/receiver pair that transmits a single channel of RGBHV and two audio channels over one single mode or multimode fiber. The system’s all digital encoding delivers noise-free transmissions that retain all of their initial parameters, regardless of fiber optic cable attenuation.