Specifications

Model AC1032A-2A Users Manual
8
3.0 Installation
3.1 Required Cables
The video input cables are generally DVI male to male (customer
furnished). The Audio inputs are 3.5 mm mini-stereo (customer
furnished). To connect to the unit to a Serial port (such as PC’s COM1)
you would need a Male/Female DB9 Serial Cable (customer
furnished).
All of these items are available for purchase upon request.
3.2 Inputs & Outputs
The AC1032A-2A has 2 video and audio inputs labeled ‘Input 1’ and
‘Input 2’. The unit has 1 video and audio output labeled ‘Output’.
3.3 Connecting the AC1032A-2A
Connect your video and audio sources such as computer or notebook
PC to ‘Input 1’ and ‘Input 2’.
Connect the display device such as a monitor (or a video projector) to
the switched video and audio outputs (SW Output).
Connect the included power supply to the AC1032A-2A.
Select the desired mode of operation including the priority for your
video and audio output using the front panel switched buttons.
If preferred, the selection can also be done through RS-232 serial
commands by connecting a DB9 RS-232 Serial cable to your PC and
the AC1032A-2A.