Specifications

Model AC1032A-2A Users Manual
18
5.3 Problem Solving FAQ
1. What are the Cable Length Limitations?
The switcher cannot be used as an extender. Therefore it is best to
plug the output of the switch directly to the display device and use
input cables that are 5 meters (16 ft) maximum. In other words, try
to keep the total length of cables from the video source to the box
and from the box to the monitor should not exceed 16 feet. At
longer distances you may experience video degradation. If you
cannot use shorter cables, try to set the refresh rate and/or
resolution of the video signal to a lower level.