Specifications

AC1037A | AC1037A-XMIT | AC1037A-REC

Switch Position EDID Information Source

Loop From loop-thru monitor

Internal Default Settings, Generated Internally

AC1037A-XMIT EDID SWITCH SETTINGS

The AC1037A units have a Bandwidth (BW) and Equalizer Setting Dip swicth located on

the front panel. The default factory settings is all switches in the off position. The default

equalizer (EQ) setting is for a short DVI cable, less than 10 feet. The default Bandwidth

(BW) setting is WIDE BW. This should work for most clean, “noise-free” DVI sources.

A narrow bandwidth setting should be used for dirty or noisy DVI sources.

Condition ( 1 ) ( 2 ) ( 3 ) ( 4 )

BW: Wide, EQ: Short Cable (<10 ft.) Off Off Off Off

BW: Medium, EQ: Short Cable(<10 ft.) On Off Off Off

BW: Narrow, EQ: Short Cable (<10 ft.) Off On Off Off

BW: Very Narrow, EQ: Short Cable (<10 ft.) On On Off Off

BW: Wide, EQ: Medium Cable (10-20 ft.) Off Off On Off

BW: Medium, EQ: Medium Cable (10-20 ft.) On Off On Off

BW: Narrow, EQ: Medium Cable (10-20 ft.) Off On On Off

BW: Very Narrow, EQ: Medium Cable (10-20 ft.) On On On Off

BW: Wide, EQ: Long Cable (20-30 ft.) Off Off Off On

BW: Medium, EQ: Long Cable (20-30 ft.) On Off Off On

BW: Narrow, EQ: Long Cable (20-30 ft.) Off On Off On

BW: Very Narrow, EQ: Long Cable (20-30 ft.) On On Off On

BW: Wide, EQ: Very Long Cable (30-45 ft.) Off Off On On

BW: Medium, EQ: Very Long Cable (30-45 ft.) On Off On On

BW: Narrow, EQ: Very Long Cable (30-45 ft.) Off On On On

BW: Very Narrow, EQ: Very Long Cable (30-45 ft.) On On On On

BANDWIDTH (BW) & EQUALIZER (EQ) SETTINGS