Network Hardware User Manual

724-746-5500 | blackbox.com
Page 12
AC1132A
724-746-5500 | blackbox.com
Chapter 2: Overview
2. Overview
2.1 Introduction
The Wireless Video Presentation System (AC1132A) turns your existing “wired” projector into a “high-end wireless” projector. The
unit’s plug-and-show wireless projection features provide efficient and successful presentation.
High-Performance Wireless Projection and Audio Projection
This high-performance wireless projection system with audio enables you to share a multimedia display with several users without
using cable.
Plug and Show
With the accompanying plug-and-show USB token, wireless presentation becomes easy. Just link your PC/laptop to the AC1132A
(through WLAN or Ethernet), plug the token into a USB port, and in seconds, your screen will project to the connected projector.
4-to-1 Split-Screen Projection
With this 4-to-1 split-screen feature, up to four PC screens can be projected to one projector in the same time. You can easily do
side-by-side comparison from four PC/PDAs.
1-to-4 Screen Projection
With 1-to-4 screen projection, you can project PC content out to up to four screens at the same time through AC1132A devices.
The 1-to-4 screen projection feature functions both under presentation mode and video mode.
Macintosh
®
(Mac) Wireless Projection
The Wireless Video Presentation System can connect to a Mac client. The Mac client software is stored in the accompanying USB
token. It enables wireless projection from a Mac.
HD Video Streaming
The AC1132A supports video streaming feature, so you can watch HD video on a big screen with original quality through wireless
streaming.
SNMP Manager
The AC1132A features SNMP management. Enable Simple Network Management Protocol (SNMP) protocol (Version 2c) to
manage and configure one or more devices through a network.
Changeable Splash Screen
You can use the application “Screen Image Background Maker” to change the Splash Screen. Design the image with the message
you would like to present, upload it through a Web control page, and you will have a customized starting page.
AP-Client Mode
You can enable the AP-Client Mode function to let the AC1132A join the existing access point through Wi-Fi. This feature
provides the flexibility of wireless network deployment in enterprise environment.
Remote Desktop
Plug a standard USB keyboard or mouse into the USB port on the front panel of the AC1132A device to control your PC remotely.
2.2 Features
• Supports Windows 7, Windows Vista, XP, 2000, and Mobile 5/6.
• Supports Macintosh
®
(Mac
®
) version 10.5 and above.
• Plug and Show. No installation required. Just plug the included token into a USB port, and start wireless projection in seconds.
• Features 4-to-1 split screen projection. One projector functions as four projectors.