Specifications

M
ulti
-
format HD Video Scaler
11
VGA: This is a dual purpose output. Depending on the output resolution
you set it will output a PC compatible signal.
Note about HDCP
For HDMI™ compliance, if the input is from an HDMI™ source with
content protection, the VGA output is blanked and front panel LED
blinks.
DVI: This is the TMDS digital output of the Scaler. You can connect this
to any PC compatible LCD with a DVI compatible connector input, or
any HDTV with a HDMI™ compatible connector input using the
appropriate cable.
2.2 Other Connections
RS232: This 9-pin D-sub connector is for connecting to your PC or other
serial control device for remote control of the AC139A.
Scaler
Interconnect Cable DB9
M/F Remote Controller
PIN Definition PIN Definition
2 TxD 2 RxD
3 RxD 3 TxD
5 GND 5 GND
AC power jack: This is a standard IEC320 / C14 power connection. The
unit’s power supply is universal (90 ~ 264 Vac, 50 ~ 60 Hz).
Video Outputs