Specifications

724-746-5500 | blackbox.com Page 13
Chapter 3: Connecting CATx Cables
3. Connecting CATx cables
3.1 Connecting the Transmitter
Connect CATx cables to the System ports of the Transmitter and
the System In ports of Receivers/LR or Line Splitter LR.
3.2 Connecting a Line Splitter LR
Connect CATx cables to the System Out ports of the Line Splitter
LR and the System In ports of Receivers/LR.
3.3 Connecting to the Power Supply
Connect the Transmitter and all Receiver and Line Splitters LR
units to the power supply using the included AC/DC adapters.
Once the system is connected, the HD View system broadcasts
to all remote monitors/speakers.
3.4 Adjusting the Picture Quality
When the broadcasted picture needs adjusting:
The Receiver (version 3)/Receiver LR/Line Splitter LR can be
tuned via the Service Utility.
Link to the HD View Service Utility:
http://www.blackbox.com
NOTE: Where there are cascaded Receivers/Line Splitters LR, you
must tune them from the unit nearest the transmitter
onwards.
3.5 Note on Serial Extension
The serial connection requires two cables: from player to a
transmitter, use straight-through serial cable; from receiver to
screen use crossover cable.