Specifications

8
Hopper Removal, Filling, and Replacement
1. Before removing the hopper from the cabinet, turn off the power by disconnecting the white two-
position connector located on top of the battery (refer to Figure 1).
2. Remove the Battery Hopper from the cabinet by sliding it forward slowly, while applying gentle upward
pressure, until it releases.
3. Fill the hopper with coins; it can be filled all the way to the top. The hopper capacity in quarters is
1,600 coins (± 10% due to the random way the coins settle inside the bin).
NOTE: When filling the hopper, do not allow any bent coins or foreign objects to enter the Coin Bin.
These may cause the hopper to jam, rendering the changer inoperable.
4. Next, reinstall the hopper. NOTE: The hopper will be quite heavy when it is full, so take additional
care when placing it back inside the AC401 cabinet. The hopper has mounting grooves on its
underside that match up with the keyed pattern cut along the sides of the green hopper plate.
Position the hopper on top of the plate, and maneuver it until it drops down. Slide it backwards until it
stops, and the hopper plate’s connector inserts into the hopper’s 12-pin connector.
5. Finally, reconnect the main harness’ white two-position connector to the mating connector located on
top of the battery. The changer will power up and be ready to use.
1 2 3 4 5 6
Figure 4
–
Battery Hopper
Hopper Coin
Bin
(Pour the coins into
this opening)
Coin Counting
Optical Sensor
12-Pin
Connector
(Connector is shown on
reverse side of actual
for detail)
Mounting
Grooves
Bill/Coin
Meter
LED Indicator
Pushbutto
n
For more information visit www.Gumball.com | 800-260-0010 | [phone]