Setup guide

4-17
Installation and Setup Guide for Cisco Secure ACS Appliance
78-14573-02
Chapter 4 Administering the Cisco Secure ACS Appliance
Working with System Data
Exporting a List of Users
This section details the procedure for exporting a list of Cisco Secure ACS
Appliance users to an FTP server for further examination and processing.
Before you begin
You must have the FTP server address and filepath, as well as the proper
credentials for writing to the FTP server (username and password).
Caution Performing this procedure stops and restarts the csauth service and will interrupt
use of the Cisco Secure ACS Appliance.
To export a list of users to an FTP server, follow these steps:
Step 1 Log on to the Cisco Secure ACS Appliance. For more information, see Logging
On to the Appliance via Serial Console, page 4-2.
Step 2 Type exportusers.
Tip You can enter the following parameters following the command or in response to
subsequent prompts: [server] [username] [filepath]
Step 3 Press Enter.
Result: The system displays the following message:
Command with restart CSAuth. Are you sure you want to continue?
Caution Performing this procedure stops and restarts the csauth service and will interrupt
use of the Cisco Secure ACS Appliance.
Step 4 To proceed, type Y and press Enter.
Step 5 At the Enter IP Address or hostname of the FTP Server prompt, enter the
FTP server IP address or hostname and press Enter.
Step 6 At the Login: prompt, enter your FTP server username and press Enter.
Step 7 At the Password: prompt, enter your FTP server password and press Enter.