Specifications

724-746-5500 | blackbox.com
Page 16
ACS253A-CT
Chapter 2: Overview
2.6.3 ServSwitch KVM Extender DVI/VGA, PS/2 Dual Access, Fiber (ACS253A-MM and ACS253A-SM)
Remote and Local Unit Back Panels
ASC253A-MM or ACS253A-SM Remote Unit Back Panel
1 2 3 4 5
6 7 8 9 10
Figure 2-3. ACS253A-xM remote unit back panel.
Table 2-3. ACS253A-MM and ACS253A-SM remote unit components.
Number Component Description
1 6-pin mini DIN connector Connects to PS/2 mouse
2 6-pin mini DIN connector Connects to PS/2 keyboard
3 Communication Error LED* Flashes to indicate number of communication errors during previous 60 minutes
4 (2) SC connectors
Interconnect—carries video and data signals to local unit over multimode (ACS253A-MM) or single-mode
(ACS253A-SM) cable
5 Link Status LED* On when link connection is locked; flashing when not connected or not functioning
6 RJ-22 connector Used for firmware upgrades
7 DVI-I connector DVI and VGA output—connects to remote console monitor
8 Video Signal LED* (green) On when attached and valid mode detected; off when not attached and detected
9 Device Ready LED* (red) Lights on when device is ready; off when device is not ready
10 4-pin power connector Links to 6-V power supply
*NOTE: For more details about the LED indicators, see Table 3-1 in Section 3.3.