Specifications

724-746-5500 | blackbox.com
Page 26
ACS253A-CT
Chapter 4: Device Control
• Press the <ESC> key to exit the OSD mode.
Using our Windows program
On all devices, you can use our small Windows program, running on a Windows computer for OSD access:
1. Download the program from our Web site (www.blackbox.com) by searching for the product code ACS253A.
2. Connect the programming cable to the programming port of the local unit.
3. Connect the programming cable to the serial port of your computer, where the program is running.
4. Start the program and follow the on-screen instructions.
5. Type in the following key sequence:
< O > + < S > + < D > followed by <ENTER>
When the OSD starts, it displays information about the attached device and firmware version, for example:
Company Name : BlackBox
Module Name : ACS253A-12lo
Version : Vers.1.3
Date : 03/05/15
To navigate within the OSD:
• Use the <L> and <R> keys to highlight a submenu and/or function.
• Press the <S> key to select the highlighted submenu or function.
• Select the Exit button to go back to the previous menu level.