User guide

OVERVIEW
17
2.6 How to Use This Guide
This guide describes the installation and configuration of Standard and Audio/Serial members
of the ServSwitch™ Brand CAT5 KVM Micro Extender range. Although the connection and
operation of these systems is relatively straightforward, you should consider the following
before getting started:
Connection & Compatibility
If you have purchased an Extender kit, this will contain all the cables required to connect the
Local Unit to your PC or KVM switch. The remote console (keyboard, monitor and mouse)
and any serial equipment connect directly to the Remote Unit.
If you have purchased a Remote Unit or Hub, ensure that it is compatible with your Local
Unit or hub (see Extender Compatibility, page 16).
For information about connection and installation, see Installation, page 18.
Interconnection Cable
You will need CATx cable, terminated with RJ45 plugs, to connect the Local and Remote
Units (see Interconnection Cable Requirements, page 19).
Adjusting Video
Video signals become distorted when transmitted over CATx cables. To get the best from
your extender system, it is essential that you adjust the Remote Unit to optimize the video
image quality:
• For experienced users, there is a Quick Setup section at the start of this guide (see page
10).
• For the full procedure, see Remote Unit Operation, page 29.