User guide

REMOTE UNIT OPERATION
30
You can restore normal Scroll Lock activity by setting switch 2 on the DIP switch block to
ON. If you do this on a Dual Access system (ACU3009A, for example):
• Private Mode operation is disabled.
• To reset the keyboard and mouse, you will need to re-power
the Remote Unit or hot-plug the keyboard and mouse on the
Local Unit.
4.2 Operating Audio/Serial Remote Units
Micro Extender kits: ACU3022A
Micro Extender Remote Unit: ACUWREM
Micro Extender 6-port Remote Hub: ACU1006MRVA
With these systems, keyboard hot keys are used to carry out keyboard and mouse reset
functions.
To enter these commands:
1. Press and release the initial ‘hot’ key.
By default, the initial ‘hot’ key is <Right Control>
2. Press and release the command key.
Changing the Initial Hot Key
The initial ‘hot’ key for both Remote and Local Units may be
changed from <Right Control> to <Left Control> by moving
switch 2 on the Remote Unit’s DIP switch block to the ON
position.