Computer Hardware User Manual

Page 59
724-746-5500 | blackbox.com
Chapter 4: Configuration
To place an assignment, proceed as follows:
1. Select the required real console in the table Real Console.
2. Double-click in the Virtual Console column to get a list of all available virtual
consoles.
3. Select the required virtual console.
You can select between the following buttons:
Table 4-9. Send and Cancel
selection buttons.
Button Function
Send Send assignments to the matrix
Cancel Reject changes
NOTE: If you activate the Auto Send function in the left lower corner of the
working area, switching operations will occur automatically without
pressing the Send button to confirm.
The selection boxes in the Virtual Console column contain a filter function so you
can easily select a single CPU from a larger pool of CPUs (see Section 4.2.2).
4.4 System Settings
You can configure the following system settings at the ServSwitch DKM FX.
NOTE: Only users with administrator rights can configure the system settings.
4.4.1 System Data
The system configuration is set in this menu.
You can access the menu via OSD and Java:
Figure 4-12. OSD and Java icons.
Select from the following settings: