Computer Hardware User Manual

Page 61
724-746-5500 | blackbox.com
Chapter 4: Configuration
4.2.1 Control via OSD
Figure 4-1. OSD icon.
Via OSD (on-screen display), you set the configuration of the ServSwitch DKM FX
operating system. The settings of the Configuration menu are described in this
chapter. All other menus are described in later chapters.
You can enter the OSD of the ServSwitch DKM FX:
• via keyboard connected to the CPU board
• via keyboard connected to a CON unit of an extender
Entering OSD
1. Start Command Mode with the hotkey.
2. Press <o> to open OSD. You will see a list of all available CPUs as a start menu.
3. Press <Esc> to enter the main menu.
Leaving OSD
• Press <Shift> + <Esc> simultaneously. The OSD will close without any further
changes and the currently active CPU connection will display.