Computer Hardware User Manual

Page 66
724-746-5500 | blackbox.com
Chapter 4: Configuration
Computer Connection to the ServSwitch DKM FX
NOTE: For a direct connection between the computer and ServSwitch DKM FX,
use a cross-wired network cable.
For a connection between the computer and ServSwitch DKM FX via
switch or hub, use a straight-pinned network cable.
Connect the network cable to the RJ-45 ports of the computer and CPU board of
the ServSwitch DKM FX.
Start of the Java Tool
Open the Java tool by a double click on the program icon or use the <Enter> key
on the keyboard.
Connection to the Matrix
NOTE: Administrator rights are required.
1. Open the Java tool.
2. Select Matrix > Connect in the menu bar.
3. Enter the IP address in the popup input field according to the network
configuration of the ServSwitch DKM FX.
4. Enter the user name and password for the ServSwitch DKM FX.
5. Confirm your inputs with the button “OK” or reject with “Cancel.”
Figure 4-5. Menu Connection screen.