Computer Hardware User Manual

Page 45

724-746-5500 | blackbox.com

Chapter 4: Configuration

4. Configuration

4.1 Command Mode

The ServSwitch DKM FX has a Command Mode that enables several functions via

keyboard command during normal use.

To enter Command Mode, use a hotkey sequence and to exit Command Mode,

press <Esc>. While in Command Mode, the Shift and Scroll LEDs on the console

keyboard will flash.

NOTE: In Command Mode, normal keyboard and mouse operation will cease.

Only selected keyboard commands are available.

The following table lists the keyboard commands to enter and to exit Command

Mode and to change the hotkey sequence:

Table 4-1. Command mode components.

Function Keyboard command

Enter Command Mode (default) 2x <Right-Shift> (or hotkey)

Exit Command Mode <Esc>

Change hotkey sequence

<Left-Ctrl> + <Left-Shift> + <c>, <hotkey code>, <Enter>

Since 8/10/2011:

NOTE: <Key> + <Key> = Press keys simultaneously; <Key>, <Key> = Press keys

successively, 2x <Key> = Press key quickly, twice in a row (similar to a

mouse double-click).

You can change the hotkey sequence to enter Command Mode. The following

table lists the hotkey codes for the available key sequences: