User`s manual

8-/16-/32-/48-Port Advanced Console Server Quick Start Guide
• Connect your serial devices to the SERIAL PORTS 1-8/16/32/48.
NOTE: If you plan to use out-of-band (OoB) dial-in access, connect the
internal modem to the phone line. If you plan to use broadband OoB,
connect the access device (such as DSL modem) to NETWORK2.
• Plug the Advanced Console Server into the AC power. The Advanced
Console Server has dual universal AC power supplies with automatic
failover built in.
Step 3: Set up the console server.
The default Advanced Console Server IP address is 192.168.0.1 (subnet
mask 255.255.255.0). With a Web browser on any computer that is
connected through the network to the Advanced Console Server:
• Enter https://192.168.0.1 into the address bar.
NOTE: The network-connected computer must have an IP address in the
same network range (192.168.0.xxx) as the Advanced Console Server. If this
is not convenient, you can use the ARP Ping command to set the IP address
(refer to the user manual for details). The Advanced Console Server also has
its DHCP client enabled by default, so it will automatically accept any
network IP address assigned by any DHCP server on your network—and will
then respond at both 192.168.0.1 and its DHCP address.
Figure 2. Serial & Network: User & Groups screen.
724-746-5500 | blackbox.com
Page 4