User`s manual

8-/16-/32-/48-Port Advanced Console Server Quick Start Guide
Step 4: Configure serial and network devices.
 Select “Serial & Network: Serial Port,” which will display the label, mode,
and protocol options currently set for the serial port. By default, all the
serial ports are set to console server mode (see the user‘s manual for
other modes).
Figure 4. Serial & Network: Serial Port screen.
 To configure a serial port, click “Edit.”
 Configure the common settings (baud rate, parity, data bits, stop bits, and
flow control) to match those of the serial device being controlled.
 Select the console server protocols (Telnet, SSH, TCP, and RFC2217)
that will be used for the data connection to the serial port.
 Click “Apply.”
 To enable access through the Advanced Console Server to a locally
networked computer (referred to as a host), select “Serial & Network:
Network Hosts” and click “Add Host.”
Figure 5. Serial & Network: Network Hosts screen.
724-746-5500 | blackbox.com
Page 6