Specifications

Page 19
724-746-5500 | blackbox.com
Chapter 4: Operation
4.3 Serial Control (AVSW-DP2X1A and AVSW-DP4X1A Only)
The Video Switch’s built-in serial interface allows users to control the Switch
through a PC, serial controller devices, or home theater systems.
Configure the controller’s serial port as shown below.
Baud Rate: 9600
Data Bits: 8
Parity: None
Stop Bits: 1
Flow Control: None
To select a source device via serial interface, select the number that corresponds to
the port it is connected to (see Figure 4-3).
Figure 4-4. Serial interface screen.
NOTE: Use a DB9 cable for serial connection.