Specifications

724-746-5500 | blackbox.com
Page 18
Chapter 3: Installation
3. Installation
3.1 Connections
Connect the transmitter module to the DVI port on the PC/video card and connect
the receiver module to the DVI port on the digital display device.
Use the DVI Extender with an LC fiber optic cable (single-mode optical fiber:
9/125 µm).
3.2 EDID Setting
The transmitter has a basic EDID table built in that includes the most commonly
used display modes. If you encounter problems selecting the right resolution and
would like to copy the EDID table from your monitor, follow these instructions:
• Connect the transmitter to the DVI port on the monitor.
Figure 3-1. DVI-D connector on the monitor.
Figure 3-2. Transmitter plugged into remote monitor.