Specifications

724-746-5500 | blackbox.com Page 25
Chapter 4: Troubleshooting
4. Troubleshooting
4.1 Problems/Solutions
Problem: No image
Solutions:
1. Make sure the PC power is on.
2. Check whether the computer and the monitor are properly connected.
3. Turn the PC power on and off.
4. Make sure the fiber cable between the transmitter and the receiver is properly
connected.
5. Check whether the LED on the transmitter shows a violet light. If the LED does
not show any activity, the video settings on the PC may be incorrect.
6. Make sure the LED on the receiver shows a violet light. If the LED does not show
any activity, the signal from the fiber cable is missing. Check the cable
connections.
Problem: Screen artifacts appear.
Solution: Check the resolution of the DVI source. This device supports up to
a 1920 x 1200 WUXGA resolution.
Problem: No sound
Solutions:
1. Make sure the power is on for the audio source.
2. Check whether the speaker power is on.
3. Make sure the audio cable is correctly connected.