User's Manual

OMNISCANNER

3. To assign a unique name to the Autotest, enter a Circuit ID into the Circuit

ID: field. Circuit IDs can be set up to automatically increment. (See Chapter

3, Setup: Editing a Circuit ID, for further information.)

If an incremental Circuit ID was created in the PROJECT Setup screen, the

Circuit ID: field will already contain the next available Circuit ID that can be

used as a default.

4. To change the name using OMNIScanner’s edit feature, highlight the field,

and press ENTER to initiate the editing mode. (See Section 1.9 for more

information.)

5. To change the Name using the list function, press (List). The

CIRCUIT ID screen opens and displays all Circuit IDs available for the project.

Use the left-arrow or right-arrow to quickly scroll through the pages. Use the

up-arrow or down-arrow to highlight a Circuit ID and press ENTER to select it

as the name for the Autotest to be saved and return to the SAVE AUTOTEST

screen.

6. Press (Autotest Save Options) to open the SAVE OPTIONS screen.

OMNIScanner: Select the Destination for saved test results (MMC or internal)