User's Manual

OMNISCANNER

A fiber cable’s Graded Refractive Index (GRI) differs depending on the

supplier. To receive accurate length results, OMNIScanner allows you to define the

GRI values for both wavelengths.

To change the fiber’s mode, use the up-arrow or down-arrow key to highlight

the mode. Press Enter to select Multimode or Single-mode.

Press (Save) to save the edited cable into the Custom Cable folder.

Press ESC to return to the SETUP screen.

4.5 Projects

Select Projects to display the Projects screen. It contains a list of all projects that are

currently stored in OMNIScanner. Predefined default projects are: TIA, ISO,

VENDOR, MICROTEST, IEEE, ATM, AS/NZ, ANSI. OMNIScanner’s project

feature allows you to organize test specifications, cable types, and test results into

Projects.

If there are tests stored in a project, the folder will appear full ; otherwise

it will be empty .

Use the up-arrow or down-arrow key to highlight a specific Project.