User's Manual

CHAPTER 5: Configuration
61
Notes:
No two plugs can be assigned the same Boot Priority number.
When a higher Boot Priority is assigned to any given plug, all
subsequent plugs will have their boot priorities lowered by a
factor of 1.
The Boot Priority is also displayed on the Plug Status Screen.
5.7.1.1. Example 1: Change Plug A3 to Priority 1
In the Example shown in Figure 5-1, we start out with all Plugs set to their default
Boot Priorities, with Plug A1 rst, Plug A2 second and so forth.
Next, the Boot Priority for Plug A3 is changed to Priority 1. This means that Plug A3
will now be switched On rst after a reboot, and that Plug A1 will now be switched
On second, Plug A2 will be third, etc..
Note that when the Boot Priority for Plug A3 is set to 1, the Boot Priorities for all
plugs that were previously Booted before plug A1 are now lowered by a factor of
one.
(Plug No.) Priority
(A1) 1
(A2) 2
(A3) 3
(A4) 4
(A5) 5
(A6) 6
BEFORE
1
(Plug No.) Priority
(A1) 2
(A2) 3
(A3) 1
(A4) 4
(A5) 5
(A6) 6
AFTER
(Assign Plug A3
to Priority 1)
Figure 5-1: Boot Priority Example 1