User's Manual

OUTLET MANAGED PDU

• Authentication / Privacy: Congures the Authentication and Privacy features

for SNMPv3 communication. The Authentication / Privacy parameter offers

two options, which function as follows:

1. Auth/noPriv: An SNMPv3 username and password will be required at log

in, but encryption will not be used. (Default Setting.)

2. Auth/Priv: An SNMPv3 username and password will be required at log in,

and all messages will be sent using encryption.

Notes:

• The Authentication / Privacy item is not available when the

Version parameter is set to V1/V2.

• If the Version Parameter is set to V1/V2/V3 (all) and Authentication

/ Privacy parameter is set to "Auth/Priv", then only V3 data will be

encrypted.

• The Outlet Managed PDU supports DES encryption, but does not

currently support the AES protocol.

• The Outlet Managed PDU does not support "noAuth/noPriv" for

SNMPv3 communication.

• SNMPv3 User Name: Sets the User Name for SNMPv3. Note that this option

is not available when the Version parameter is set to V1/V2.

(Default = undened.)

• SNMPv3 Password: Sets the password for SNMPv3. Note that this option

is not available when the Version parameter is set to V1/V2. (Default =

undened.)

• SNMPv3 Password Conrm: This prompt is used to conrm the SNMPv3

password that was entered at the prompt above. Note that this option is not

available when the Version parameter is set to V1/V2. (Default = undened.)

• Authentication Protocol: This parameter determines which authentication

protocol will be used. The Outlet Managed PDU supports both MD5 and SHA1

authentication. (Default = MD5.)

Notes:

• The Authentication Protocol that is selected for the Outlet

Managed PDU must match the protocol that your SNMP client will

use when querying the Outlet Managed PDU.

• The Authentication Protocol option is not available when the

Version parameter is set to V1/V2