User's Manual
24
®
Clearing IP access control
This option removes all entries from the IP access control feature within the
ServSwitch CX Uno IP.
What is IP access control?
The IP access control feature (configurable by a remote admin user) allows
certain network address ranges to be denied access to the ServSwitch CX Uno
IP. If set incorrectly, it is possible to exclude all network users and so this option
provides an emergency recovery point.
To clear IP access control
1 From a local keyboard (not accessible from a global keyboard), log on as the
‘admin’ user.
2 Press
(hotkeys can change).
3 Press to select the More Menus.
4 Select ‘Configuration’.
5 Select ‘Network Configuration’.
6 Highlight the ‘Clear IP Access Control’ option and press .